www.mespune.org
Site Logo Modern Education Society’s Cusrow Wadia Institute of Technology, Pune
(Wadia College Campus)

Programme Introduction

Department conducted a post HSC Diploma in Electronics and Radio Engineering since 1958. The Diploma in Electronics and Telecommunication course was started in the year 1999. The department has highly dedicated and qualified faculty. The department has following well equipped laboratories: Electronics Circuit Analysis & Design, Basic & Applied Electronics, Electronics Workshop & Maintenance, Mechatronics, Microprocessor and Microcontroller, Embedded Systems, Communications, Advanced Communication, VLSI, Power Electronics and Industrial Drives.

Vision

To be a leading department that excels in academics to meet the needs of industry and society.

Mission

  1. M1: To impart technical education through continually enhanced learning resources.
  2. M2: To empower all stakeholders with strong foundation for life- long learning.
  3. M3: To strengthen moral values through activities directed towards social needs

PEO's , PO's & PSO's

Program Educational Objectives

The following Program Educational Objectives are established for the Electronics & Telecommunication Engineering:

  • PEO1: To apply the acquired knowledge of basic sciences and mathematics in solving electronics and telecommunication engineering problems.
  • PEO2: To build strong academic foundation and develop effective communication skills to meet industrial and social needs.
  • PEO3: To inculcate team spirit, professional ethics and environmental awareness to prepare students for lifelong learning and entrepreneurship
Program Outcomes

  • Basic and Discipline specific knowledge: Apply knowledge of basic mathematics, science and engineering fundamentals and engineering specialization to solve the engineering problems
  • Problem analysis: Identify and analyse well-defined engineering problems using codified standard methods
  • Design/ development of solutions: Design solutions for well-defined technical problems and assist with the design of systems components or processes to meet specified needs.
  • Engineering Tools, Experimentation and Testing: Apply modern engineering tools and appropriate technique to conduct standard tests and measurements.
  • Engineering practices for society, sustainability and environment: Apply appropriate technology in context of society, sustainability, environment and ethical practices
  • Project Management: Use engineering management principles individually, as a team member or a leader to manage projects and effectively communicate about well-defined engineering activities
  • Life-long learning: Ability to analyze individual needs and engage in updating in the context of technological changes.
PROGRAM SPECIFIC OUTCOMES (PSOs)

  • Demonstrate basic analog and digital electronic circuits using modern electronic tools.
  • Troubleshoot and monitor specified electronic system.

Head of Department

Dr.A. S. Chandak

Head of Department

Faculty List

Sr. No.NameDesignationProfile Link
Dr.D.V.Patil Click Here
Prof. Mrs. A.S.PatilSenior Grade LecturerScience & Humanities Click Here
Prof.R.B.DhonuksheSenior Grade LecturerScience & Humanities Click Here
Prof. S.S.KaleSenior Grade LecturerScience & Humanities Click Here
Prof. Mrs. K.A.TakleSenior Grade LecturerScience & Humanities Click Here
Prof. Mrs.R.A.DeshmukhLecturerScience & Humanities Click Here

Academic Calendar

Laboratory Names
1. BASIC ELECTRONICS 7 MECHATRONICS
2. ANALOG ELECTRONICS 7. MICROWAVE
3. AUDIO /VIDEO LEARNING CENTRE 9. POWER ELECTRONICS
4. MICROPROCESSOR AND MICROCONTROLLER 10. ELECTRONIC MEASUREMENT AND CONTROL SYSTEM
5. COMPUTER SOFTWARE LABORATORY 11 CONSUMER ELECTRONICS
6. MOBILE COMMUNICATION
Electronics & Tele. Comm. Engineering Laboratories

Laboratory

Basic Electronics Engineering Lab

In the Basic Electronics Engineering Lab, the first year students are trained to handle the basic equipment’s/instruments including Signal Generators, Cathode Ray Oscilloscope (CRO) and Digital Multimeter (DMM).

Fundamental experiments in Analog and Digital Electronics are offered. The basic purpose is to understand the Importance of Learning by doing, Impact of Electronics in the modern world, Need to understand Basic principles of electronics.

This lab covers experiment on basic electronics components and their features, Integrated Circuit Operational Amplifier circuits and Digital Integrated Circuits

Major Equipments: CRO, Signal Generator, Single Power Supply, Dual Power Supply, Digital IC Trainer Kits, Basic Electronics Experiment Kits.

Utilization of Laboratory: Sem-I- F.E. Basic Electronics Engg Sem-II- F.E. Basic Electronics Engg.

Lab Incharge: Prof.S.S.Pansare Support Staff: Mr.L.N.Malage

Electronics Measurement and Advanced Equipment Lab

The lab aims at imparting practical knowledge of Power Electronics and different measuring instruments to the students. It is accordingly well equipped with equipment’s and trainer kits to teach practical from fundamentals to high level concepts to the students. Learn the characteristics of different types of power electronic device understand and analyze the operation of controlled rectifiers, choppers & inverters. Students are trained to handle measurement instruments including Spectrum analyzer, UPS, Logic Analyzer, Digital storage oscilloscope.

Hardware: CRO, Signal generator, Dual power supply, Offline UPS trainer kit, DSO, Power Scope, Controlled rectifier, AC voltage contoller, Triggering Ckt., Inverter, Chopper, SMPS, Logic analyzer, True RMS meter, Spectrum analyzer, Distortion meter, Frequency Counter.

Utilization of Laboratory: Sem-II- T.E. Power Electronics Engg .

Lab Incharge : Prof. U.D.Dattasamje

Project and Design Development Lab

The lab is equipped to assist students with designing, constructing, testing and experimenting with analog circuits. The lab emphasis is to provide students with analog design experience. In addition, the lab supports those who do their mini projects, signal conditioning circuits for BE projects or ME thesis related to analog circuit designs.

Major Equipment:

Cathode Ray Oscilloscope 30 MHz Cathode Ray Oscilloscope 20MHz Function generators 2 MHz Dual power supply +/-30V,2A Power supply +5, +/-30V,2A Digital storage oscilloscope 25 MHz

Support staff: Mr.S.B.Shinde. Lab area:64sqm.

Digital Electronics Lab.

The laboratory is well equipped with digital trainer boards and IC tester required to give hands-on training to students for digital Electronics subject.

The Laboratory conducts practical sessions to students to enable the students to implement their theoretical knowledge , observe the practical results , gain practical knowledge and understand the subject to implement it in industry .

Digital IC Tester Mechatronics Test Equipment (I) Pvt Ltd. 01 Digital Trainer Boards Tirupati Entp. 15 Hal Tec Plus 15 Laser Printer 1020 Plus HP 01 Computers Lenovo 07 DC Power Supply and CRO Hal Tec Plus 04 Function Generator Tirupati Entp. 04

Dr. Kadam Rekha Shashikant

Circuit Simulation And Modeling Lab

The laboratory is well equipped with high end computer systems & software’s. The licensed Software’s installed in the laboratory are: Multisim 14, 12, Multisim 11. During the first semester, the laboratory is used to conduct lab work for S.E. E&TC Engineering students for the assignments in Electronic Circuits and mini projects.

As a part of Electronic Circuits laboratory students perform simulation assignments to test different circuits based on transistors. This includes circuits like feedback amplifiers oscillators etc. As a part of Design they simulate their designs like SMPS, Power supply to finalize design assignments. During the Second semester, the laboratory is used to conduct lab work for S. E. E&TC Engineering students for the assignments in languages like C,C++ and Java

Major Equipment’s: Software Installed: Multisim 14, 12, Multisim 11 Printers: 2 Laser Printers

Name of Lab In-charge: Prof.S.N.Dharwadkar

Signal Processing Lab

The lab space is 66sqm occupied by 1 staff cabin and 25 Desktops.Thelicensedsoftware’sinstalled in thelaboratoryare:MATLAB R2021a: Campus Wide Suite.Experiments based on software are performed in this lab. This lab covers experiments on Signal Processing, Image Processing, Digital Communication, Machine Learning.

MajorEquipment’s:Hardware:25 computers LenovoV500 corei7,8GBRAM, 1 TB HDD,19”TFTMonitor.Printers:LaserPrinter-1Switch:Huawei Gigabit Switch 24 Port.SoftwareInstalled:Suselinux,Win10Professional,MATLAB,MicrosoftOffice,C/C++

Utilization of Laboratory: During the first semester, the laboratory is used to conduct digital signal processing for T.E.(E&TC),DigitalimageprocessinglabforE.T.E.(E&TC),andLABforME(signalprocessing)During the second semester, the laboratory is used for conduction of Information theory andcoding technique lab for T.E. (E&TC), Speech processing for B.E. (E&TC), and LAB forME(signalprocessing)

LabIn-charge:Prof.M.M. DhanvijaySupport staff : Mr. Sanjay Dhebe

VLSI Design and Software Development Lab

The VLSI laboratory is well equipped with the most up-to-date industry standard VLSI EDA tools and hardware resources like Xilinx Vivado Suite and tools, Spartan3 FPGA,Virtex5 FPGA, SPARTAN 6 FPGA, ARTIX 7 FPGA and CPLD. The laboratory provides hands-on experience to students in the field of analog and digital circuit design to conduct world class research. The laboratory is designed to expose the students to a set of tools for CMOS design, starting with SPICE circuit simulation and leading to physical layout, design rule checking, and extracted circuit simulation. Students gain knowledge in using EDA tools to design, simulate, and verify schematics and layout of logic gates. It also serves to facilitate design and implementation of digital design on FPGA. The students use Programming Languages like VHDL etc. to do their course work and project work. The VLSI laboratory is well equipped with 25 high end PCs with various licensed software and 10 Basys SPARTAN 6 FPGA Boards for students.

Utilization of Laboratory:
The lab is used for course VLSI Design and Technology Practical in BE Sem-I and for BE Projects. Students also use this lab for doing mini projects.

Name of Lab In-charge: Dr. Kanchan S. Tiwari

Digital and Analog Communication Lab.

The laboratory is well equipped with digital and analog communication trainer kits, spectrum analyser, CRO, DSO, function generator required to give hands-on training to students for digital communication and principles of communication system course.

The Laboratory conducts practical sessions to students to enable the students to implement their theoretical knowledge, observe the practical results, gain practical knowledge and understand the course to implement it in industry .

The Laboratory conducts sessions for S.E.to B.E. students .

Lab Incharge: Prof. Bharati Mohan Narute

Microwave and Optical Communication Lab

The laboratory is well equipped with equipments and instruments required to give hands-on training to students for advance subjects like Optical communication ,Mobile communication .

The Laboratory conducts practical sessions and training to students to enable the students to implement their theoretical knowledge and observe the practical results and gain practical knowledge to implement it in industry

Major Equipment: The laboratory has a Microwave bench for X-BAND including Microwave transmitters using Klystron Tube and Gunn diode. The Microwave bench has been purchased from AMITEC ELCTRONICS LTD. The Optical Fiber Communication Lab has set up including Optical Transmitters , Optical Receivers , Optical fiber both plastic and glass , optical patch chords, optical pigtails , connectors, adaptors and attenuators. The Optical communication Lab has measurement instruments such as Optical Power Meter and Optical Time Domain Reflecto meter purchased from Bench Mark Electronics Ltd. Optical Power Meter manufactured by SVAN Telectronics in the 2nd and 3rd window of operation is available in Lab. Optical sources such as L.E.D and Laser Diodes and Optical Detectors such as P-i-N diodes and APD are available in Lab. The Lab has an inbuilt precision measuring tool- A MECHANICAL JIG for measuring the Numerical Aperture of fiber with a precision of 0.01mm The optical sources and detectors used are from INFINEON The lab has 5.8 GHz Satellite trainer kit by AMITECH ELECTRONICS LTD

Microwave Bench X-band Amitec Electronics Ltd 1 Optical Fiber Analog Link Photon Techniques 3 Optical Fiber Digital Link Photon Techniques 2 Optical Trainer for LD1310nm Photon Techniques 1 Optical Tx and Rx Photon Techniques 1 Optical Analog & Digital trainer FALCON 3 Optical Analog Link Trainer Sigma Trainers 1 Optical Digital Trainers Sigma Trainers 1 Frequency Response - Optical Sigma Trainers 1  OTDR Bench Mark Electronics 1 Optical Power Meter SVAN Teletronics 1 Antenna Trainer Lab Amitec Electronics Ltd 1 Microstrip Antenna Lab Amitec Electronics Ltd 1 C.R.O Systronics Ltd 5 Regulated Power Supply Radial Industries 5 Optical Power Supply Photon Technique 5 Function Generators APLAB 2

Lab Incharge: Prof.Y.M.Ajgar
Support Staff: Mr.S.M.Kate

Mechatronics Lab

In the Mechatronics Lab, the third year students are trained to handle various sensors & actuators. Experiments performed in mechatronics lab majorly involve the interacting of various sensors, transducers and actuators with Arduino board which is representing the modules designed in National Instrument’s LabView software. Few trainer kits are there for understanding of different sensors. These trainer kits & interfacing platforms always helps students to understand the basic knowledge of measuring, controlling & calibration of various sensors involved in lab experiments.

Major Equipments: CRO, Signal Generator, Single Power Supply, Dual Power Supply

Dual Channel CRO 6 Power Supply (0-32VDC) 8 Analog PLC trainer kit 1 LVDT transducer distance measurement kit 1 Arduino uno boards 8 Lenovo PCs 9

Lab Incharge: Prof. P. S. Tondewad
Support Staff: Mr. Sunil Kate

Embedded Systems Lab

In the Embedded Systems Lab, the third year and final year students are trained to perform experiments using advanced microcontroller development boards. Students learn detailed architectures of advanced controllers and write programs for the same. In Embedded Systems Lab, we facilitate students to develop their mini projects in third year and major projects in final year.

Here, we also train students for Embedded operating systems on ARM9 development boards. Also students write program for DSP processor such as TMS320C67 processor. In this lab students are facilitate with Arduino Uno boards to their prototype along with the various sensors.

Major Equipments: ARM7 – LPC2148 Development Board, ARM9 – LPC2129 Development boards, CortexM3- LPC1768 Development boards, Texas Instruments DSP – TMS320C67 Development Boards, Interfacing cards – Graphic LCD, TFT display, GSM/GPS, SD Memory cards etc

Utilization of Laboratory: Sem-I- BE – Elective 1 – Embedded Systems & RTOS Sem-II- TE – Advanced Processors

Lab Incharge: Prof. P. M. Bagul
Support Staff: Mr. Sanjay Dhebe

ME Lab

Centre Of Excellence

Centre Of Excellence in Telecomm was established in the year 2015 and formally inaugurated on 8 TH June 2015 jointly by B.O.S Chairman of Electronics & Telecomm Dr.D.S.Bormane of SPPU and Mr.Amit Sharma –CEO of Amitec Electronics Pvt.Ltd ,New Delhi

The Centre Of Excellence in telecomm is estabilished under the Industry Institute Interaction Cell to reduce a gap between industry expectations and academic offerings by direct involvement of industry to attain a symbiosis. Transfer of Skills and knowledge from industry will promote the activity “Bridging the gap between INDUSTRY –ACADEMIA “

The first collaboration Of COE-TELECOMM was with Amitec Electronics Pvt.Ltd, New Delhi which has signed a MoU with our college to help set up a laboratory in COE-TELECOMM . Amitec Electronics –New Delhi has set up a Lab in Software Defined Radio – a new technology relating to XG and Cognitive radio. Academics, Hands on Training in SDR, Projects and Research are the one of the aims of COE- TELECOMM. Besides SDR, the COE-TELECOMM is equipped with Measurement /Fabrication Lab, EMI- EMC LAB for testing along with Logic /Protocol Bus Analyzer. Amitec Electronics Pvt. Ltd as per the MoU has helped the COE –TELECOMM with industry based projects and industrial visit to their factory workshop in Sahibabad. Faculty Development Programmes and Short Term Training programmes are continually held by the COE-TELECOMM.

RemoteLabs.in has been established under the COE-TELECOMM by a FACULTY from college R &D cell and an undergraduate student from external college. Using the facility of Remote Labs.in, students from any location nationwide can connect to our Software Defined Radio Lab and perform and test practicals live ! Check the demo video on https://lnkd.in/b5WCXgd Many more projects and research on going at COE-TELECOMM

Centre of Excellance-amitec Lab.pdf Report

Curriculum

E & TC_MPES_2018 _ Curriculum

Download PDF

E & TC_MPES_2014 _ Curriculum

Download PDF

LIst of Toppers

Yearwise

Sr. No.YearName of StudentPercentage (%) / CGPA
1 2004 Suraj Naik 70.00 %
2 2005 Dinesh Iyyengar 77.20 %
3 2006 Arpit Jain 73.93 %
4 2007 Andrea Pereira University topper 78.53 %
5 2008 Siddharth Shah 76.06 %
6 2009 Varun Mehta 76.00 %
7 2010 Madhura Tapse 78.06%
8 2011 Amar Khopade 71.53 %
9 2012 Varun Nair 74.53%
10 2013 Vallabh Jagtap 77.86 %
11 2014 Pratik Pandey 71.86 %
12 2015 Rohit Shinde 73.19%
13 2016 Samveg Shah 78.00 %
14 2017 Sayali Mahajan 83.73 %
15 2018 Tejaswini Warekar 78.00 %
16 2019 Purva Ardhapurkar 80.16 %
17 2020 Manisha Chemate 76.29 %
18 2021 Burhade Aparna 10 CGPA

Result Analysis

Projects done by our students

Mahaveer Electronics

20-05-2021 To 19-05-2022

Highlights

  1. Knowledge Sharing, Sponsership to BE project, project Interenship to SE, TE & BE students , industry visit.

Blacktix Technologies

10-12-2020 To 09-12-2021

Highlights

  1. Knowledge Sharing, Sponsership to BE project, project Interenship to SE, TE & BE students, industry visit.

Imrenable Automation

30-12-2020 To 29-12-2021

Highlights

  1. Knowledge Sharing, Sponsership to BE project, project Interenship to SE, TE & BE students , industry visit.

ICT Academy

Collaboration Period : From 07-02-2019 To 11-12-2025

Area of Collaboration

Highlights-

  1. Course oriented Training, student Development program at subsised rate by Oracle/Amazon AWS/ DELLEMC/Sales Force/ PALO ALTO/ Auto Desk, free FDP, power seminar, youth talk and placement assistance

IoT CoE

Collaboration Period :01-08-2018 To 01-08-2019

Area of Collaboration

Highlights-

  1. Skill training and Job oriented Programs for students

R.S. Network

Collaboration Period : From 10-06-2015 To 10-06-2016

Area of Collaboration

Highlights-

  1. To conduct Student Training Programs for CCNA

Mitsubishi Electric India Ltd.

Collaboration Period : From 30-11-2015 To 30-11-2018

Area of Collaboration

Highlights-

  1. To further strengthen the commitment for enhanced Industry-Academia interaction, college has signed MOU with Mitsubishi Electric India Pvt. Ltd., Gurgaon.
  2. Under this collaboration MEI will provide training/automation courses, seminar/demonstrations on automation technology and products to the students nominated by MESCOE.
  3. To develop mechatronics lab /Hands on
  4. Training of automation courses, seminars, webinar/demos on automation technology

Sphier Unified Solutions Pvt Ltd, Pune

Collaboration Period : From 15-09-2015 To 15-09-2017

Area of Collaboration

Highlights-

  1. To conduct webinar/demos on automation technology.

Amitech electronics Pvt Ltd

Collaboration Period : From 10-05-2015 To 10-05-2020

Area of Collaboration

Highlights-

  1. Collaboration under Industry-Institute Partnership Cell
  2. To set up Centre of Excellence in Telecommunication to promote Research in Software Defined Radio & Advance Electronic Communication System

Pro-active IT Services Pvt Ltd

Collaboration Period : From 11-03-2015 To 11-03-2016

Area of Collaboration

Highlights-

  1. To set up Centre of Excellence in Telecommunication to promote Research in Software Defined Radio & Advance Electronic Communication System

CDAC

Collaboration Period : From 06-08-2014 To 05-08-2017

Area of Collaboration

Highlights-

  1. To train the concerned faculty nominated by MESCOE in respective subject domain.
  2. Student training in Embedded and VLSI domain.

Graceful Growth

Collaboration Period : From 14-08-2015 To 14-08-2016

Area of Collaboration

Highlights-

  1. To Conduct Seminar & Trainings for Staff and Students

Edgate Tecnologies & Texas Instruments, Bangolre

Collaboration Period : From 25-05-2014

Area of Collaboration

Highlights-

  1. To develop mixed signal processing lab.
  2. To conduct Circuit making competitions.

Pearson VUE Authorised Centre Credit Agreement

Collaboration Period : From 11-03-2014 To 17-03-2017

Area of Collaboration

Highlights-

  1. To conduct exams for Microsoft and CISCO

Trident Techlabs Pvt. Ltd.

Collaboration Period : From 24-06-2013 To 24-06-2014

Area of Collaboration

Highlights-

  1. The college has set up lab which will be entitled “Texas Instruments Stellaris Lab.
  2. Texas Instruments Stellaris development kits based on TI platform.
  3. Undergraduate final year students and postgraduate students develop projects using these kits.

Newsletter by E & TC Department

2020-21 Semester I

Download PDF

2019-20 Semester II

Download PDF

2019-20 Semester I

Download PDF

FDP

Online Session on – “Career options and opportunities for Electronics Graduates”

Online Session on – “Career options and opportunities for Electronics Graduates”

Objective:
1) To gain Knowledge regarding Future enhancement of Electronics Branch. 2) Higher Studies in Electronics sub branches. 3) To gain knowledge about Electronics Industry.

Mr.Renjith CV:-He is the Electrical Architect-Medical Imaging at Philips HealthCare. He has 19+ years of Experience in Electronics and in Product design. Along with this Mr Renjith is Expertise in X-Ray Imaging design for Cathlab, C-Arm, and Diagnostic X rays Systems. He is really a good team worker as he has worked with the different people from different countries such as Netherlands, France, Germany, China, South Korea and India. He shared his fruitful knowledge of Products regarding Electronics and gave the students a wonderful guidance of Future Enhancement of the Electronics.

Targeted Audience:- SE ,TE and BE students.
Number of Staff Members:-8
Number of Students Presents:-97
Date:-20th July 2021.

Guest Lecture on “Carrier Opportunities after Graduation Through Gate Examination ”by ACE Academy organised by Student Development Cell ,Dept of E&TC ,MESOE .

Guest Lecture on “Carrier Opportunities after Graduation Through Gate Examination ”by ACE Academy organised by Student Development Cell ,Dept of E&TC ,MESOE .

Objectives:
1. To create awareness amongst students about GATE exam. 2. To create awareness about importance of basic subjects of E&TC in GATE exam. 3. To motivate students for giving gate exam.

An online guest lecture on“Carrier Opportunities after Graduation Through Gate Examination”by ACE Academy was conducted for SE and TE students on 4 February 2021 at 10.30 am on ZOOM platform. The lecture started of with sharing Guest Speaker Mr. ANAND KUMAR sir’s personal experiences. The speaker then explained the students regarding different streams for GATE exam and cutoff marks for different streams, marking scheme, Paper pattern .He also explained the method for preparation and the subjects which are important and how much marks those subjects carry in GATE exam .Different openings in government sector after qualifying GATE exam .
Students were then given details (Exam procedure, Job offered, Pay, Syllabus , How to prepare, Application) about GATE Exam . .

Target Audience : SE ,TE students .
No. of Students Present: 132.
Day &Date: 4th Feb 2021. .
Resources Person: Mr. Anand Kumar ACE Academy .

Target Audience : SE ,TE students .
No. of Students Present: 132.
Day &Date: 4th Feb 2021. .
Resources Person: Mr. Anand Kumar ACE Academy .

Target Audience : SE ,TE students .
No. of Students Present: 132.
Day &Date: 4th Feb 2021. .
Resources Person: Mr. Anand Kumar ACE Academy .

Objectives:
1. To gain a strong foundation in Linux from scratch.
2. To help students master important Linux concepts such as Linux installations, Packages, Architecture, File System .
3. To enhance Alumni interaction with current students.

Name of the Guest Speaker: Mr.Tejas Vasekar (Alumni of E&TC, MESCOE) Mr.Tejas Vasekar has received the B.E degree in Electronics & Telecommunication Engineering from MES College of Engineering, University of Pune in 2017.Currently, he is. Working as Firmware Engineer at AMS semiconductor Hyderabad .He has 2.5 years of experience in Firmware Engineering ,worked on multiple HW platform

Guest Speaker shared his personal experiences, the difficulties faced by him, the efforts taken etc.
Target Audience : SE ,TE and BE students
No. of Students Present: 77
Day &Date: , Saturday ,16 January 2021
Time frame: 11 AM to 5 PM .

Name of activity: Guest Lecture on “Carrier Guidance” by Our Alumni Mr.Manoj Kalorey.

Name of activity: Guest Lecture on “Carrier Guidance” by Our Alumni Mr.Manoj Kalorey.

Objectives:
1. To aware the students about current trends in Industry .
2. To motivate the students for higher education
3. To enhance alumni interaction

A lecture of was conducted for all E&TC students. The lecture started of with sharing Guest Speaker’s personal experiences, the difficulties faced by him, the efforts taken etc. Mr.Manoj Kalorey worked as development specialist in Big companies like Mercedes Benz, Capgemini, General Electric, Diageo etc.He is also the winner of Hackathon held at Diemler Germany in 2019 .
Mr.Manoj very nicely explained the carrier options after graduation i.e.Core ,IT,Networking ,MBA,PG ,GATE etc.He also told the students about the add on courses which students can opt for better carrier .He focused on importance of Aptitude and communication skills also. The Guest Speaker also explained the current trends of IT industry i.e. Data Scientist, Big data Engineer, data Engineer and their roles and responsibilities.Also students were told on factors to consider for choosing the right carrier, how to be motivated to study and Students also asked their doubts.
The lecture ended with the prime focus being "Choose a career that makes you Happy"

Target Audience : SE ,TE ,BE E&TC students
No. of Students and Staff Present: 259
Day &Date: 5th September 2020.
Resources Person: Mr. Manoj Kalorey (Alumni of MESCOE)

Name of activity: Guest Lecture on “Carrier Guidance” by Our Alumni Mr.Manoj Kalorey.

Name of activity: Guest Lecture on “Carrier Guidance” by Our Alumni Mr.Manoj Kalorey.

Objectives:
● To skill up Microsoft Office knowledge which will help supporting staff to execute their departmental responsibilities.
● To impart knowledge of Corel Draw to support staff.
Target Audience :All supporting, administrative, library staff who is working in a Higher Education Institutions

Resource Person: Mrs. Sheetal Bagul (MS Office Certified Trainer)
She is running her own computer institute known as “Bagul Infotech”, conducting various courses Fundamental of Computer, M.S. Office, Tally 9.0 ERP, Internet, Programming Language C programming, C++, Data Structure, Visual Basic 6.0, Core java and Advance JAVA, DBMS, etc. She has work experience of more than 6 years as Faculty in ICWAI (Pune Chapter of Institute of Cost & Works Accountants of India). She has received International Certification of Microsoft Office Specialist & Microsoft Office Expert (MS Word & MS Excel).

We have received more than 1000 registrations from all over India, almost from all states like Tamilnadu, Madhya Pradesh, Chhattisgarh, Punjab, Haryana. On MsTeams Everyday more than 320 participants had attended the program also the event was live streamed on YouTube channel. The session was very interactive. For every topic, hands-on sessions, assignments and tests were conducted. The participants shared their experiences and appreciated the workshop during the valedictory function. Online e-Certificates were issued to all the participants after successful submission of their feedback.
Outcomes:
● Staff can support departmental activities like maintaining student’s data, preparing marksheets for exams etc.
● Staff will be able to prepare brochures for various activities.

Date/Duration of the program: Wednesday, Thursday, Friday 19th, 20th, 21st May 2021 (Three days)
Time frame: 10:00 a.m. – 5:00 PM for all 3 days.
No. of Staff Present: 400+

Online Workshop on “Proteus Simulation and PCB Workshop”.

Online Workshop on “Proteus Simulation and PCB Workshop”.

Objectives:
1. To educate interested students about the use of the software Proteus in PCB design and simulation.
2. To create schematics and electronic prints for manufacturing printed circuit boards.
3. To enhance Alumni interaction with current students.

Name of the Guest Speaker: Mr.Rohit Tondare (Alumni of E&TC, MESCOE)
: Mr.Rohit Tondare has received the B.E degree in Electronics & Telecommunication Engineering from MES College of Engineering, University of Pune in 2020.

The Proteus Design Suite is a proprietary software tool suite used primarily for electronic design automation. The software is used mainly by electronic design engineer and technicians to create schematics and electronic prints for manufacturing PCB. It is easy to use and widely used in industry.
PCB designing is the most required part of Electronics hardware and product development.
In this workshop, students built basic circuits using opamp. The circuits using Arduino boards were also simulated.
The students learnt how to design single and multi-layered PCB.
Guest Speaker shared his personal experiences the difficulties faced by him, the efforts taken etc.

Target Audience: SE TE and BE students
No. of Students Present: 98
Day &Date: Saturday and Sunday 23 January and 24th January 2021.

Online Guest Lecture on “Research Trends and Job opportunities in RF/Microwave Industry under Defence Sectors”.

Online Guest Lecture on “Research Trends and Job opportunities in RF/Microwave Industry under Defence Sectors”.

Objectives:
1. To create the awareness about RF/Microwave domain in Defence R&D Sector
2. To motivate the students to select core electronics as their career.
3.To enhance Alumni interaction with current students .

Name of the Guest Speaker: Dr.Shivraj Rathod (Alumni of E&TC, MESCOE)
Dr S. M. Rathod has received the B.E degree in Electronics & Telecommunication Engineering from MES College of Engineering, University of Pune in 2012. He received both M. Tech and PhD degree in Electronics Engineering from Veermata Jijabai Technological Institute (VJTI), in 2015 and 2019, respectively. Currently, he is an Assistant Manager in Defence R & D Division of Kalyani Centre for Technology and Innovation (KCTI), Bharat Forge Limited (BFL)-Pune. Now, he hold the position of coordinator for “Centre of Excellence in RF & Microwave Technology” at Defence R&D Division of BFL, Pune. He is coordinating the team members at KCTI group for the Indigenous development of various Radar systems for Ministry of Defence under Indian Design, Development and Manufacturing (IDDM) category with Make in India Scheme for Defence production.
He started his presentation by giving introduction of Bharat Forge and its different campuses and their different products .He nicely explained the importance of basic subjects like DSP,DIP,and Electromagnetics,Electronics Design and many more and their applications in Defence industry.He explained the different job opportunities in RF and Microwave area.
Guest Speaker shared his personal experiences,the difficulties faced by him,the efforts taken etc.Dr.Shivraj’s Journey was really motivational .
He also explained about the internship opportunity in BFL,scholarship students can get in BFL.

Target Audience : TE and BE students
No.of Staff Present : 08
No. of Students Present: 70
Day &Date: , 5th December 2020.
Time frame: 11 AM to 1 PM

Target Audience : TE and BE students
No.of Staff Present : 08
No. of Students Present: 70
Day &Date: , 5th December 2020.
Time frame: 11 AM to 1 PM

Target Audience : TE and BE students
No.of Staff Present : 08
No. of Students Present: 70
Day &Date: , 5th December 2020.
Time frame: 11 AM to 1 PM

Objective: -
1) To gain knowledge regarding higher studies in abroad
2) To know about placement preparation and project selection.
3) To learn about GATE preparation.

3) To learn about GATE preparation.
Name of Guest \Speaker: -
1)Vishal Pillai: - He is last year pass out with distinction in BE from MES college of Engineering, pune. He has got admitted to for Master’s degree programme in Electrical Engineering at LUT Finland. He has also scored 7.5 in International English Language Test System Exam. He guided regarding higher studies in abroad and the documents required and the exams required for preparation of higher studies in abroad.
2)Piyush Nindane (Embedded &IOT Engineer) and Abhishek Patil (BE E&TC): - They are from batch2021 of BE. They guided regarding placement preparation and project selection. Even they shared their thoughts and valuable knowledge through their real-life experience. They introduced students to the importance aspects and skills required to crack interview. they provided the tricks to tackle the placement challenges.
3)Yogesh Jadhav(E&TC) and Pranav Gore (MECH): -They are from current batch of BE. They guided students regarding GATE preparations. they helped students about the books and handwork required to crack exam.

 Targeted Audience: - SE and TE students
 No of staff members: -8
 No of students present: -96
 Date: - 25 June 2021
 Time frame: - 1:30 pm to 4:30 pm

Guest lecture on How a leader deals with problems by Brigadier Saurabh Tewari

Guest lecture on How a leader deals with problems by Brigadier Saurabh Tewari

Date: 29th June 2021 Time: 4-5 pm
Total Participants: 153 people Platform: Microsoft Teams

Description:
The Directing Visions team decided to keep a Guest lecture on 29th June, 2021. Rashmi Mali, President of the club invited Brigadier Saurabh Tewari Sir for the informative session. This added to the excitement of students. The program started with an introductory speech by Rashmi Mali about the Guest. The session was then handed over to the Guest for further continuation. Sir initially began by introducing himself to the students and then talked about general things related to the army. He explained his thoughts regarding leadership and the qualities that should be acquired by a leader with the help of a presentation and his experience in the Indian Army. He shared the perks of getting into defence forces and personal experiences of himself during his service time, and how to tackle complex problems. He shared the joining procedure that students can opt for. By knowing his personal experience students were amazed about him. He also told about his experiences while working with different kinds of Ministries of India. He explained about different types of situations that arise in life unknowingly and how to tackle such problems positively with confidence and patience. He described the qualities that a student should acquire during his/her heir early ages so that it will help them in the future. He then shared some tips for the SSB interview. Excitingly he also shared a booklet of notes from the book “How to win friends and influence people” by Dale Carneige and recommend students to read it. Lastly, a Questions and Answers session was conducted in which participant’s doubts and queries were solved. His contribution to the nation was appreciated, valued, and acknowledged. At last, the session was concluded with a vote of thanks by Rashmi and the overwhelming response by the members was appreciated.
Conclusion: .
The session was lasted for about an hour. Participants enthusiastically took part during the session. All the doubts of attendees were cleared by the Saurabh Sir. Excellent responses were given by the participants. .